01254 888416  

Split Bay iInterior Parts Page

All Prices include VAT and Carriage

Our range of beds fit all models of VW vans from the Splits to the T5.

All our beds bolt in using High Tensile nuts and bolts and fitting is simplicity itself.  

We sell worldwide and many converters use our beds, we have the reputation. With prices starting from £250.00 including carriage

(UK Mainland) and VAT our beds are excellent value for your money.

Two sizes  of bed are available for each model of van 3/4 width maximum width of the bed 45" which leaves room for side units, 

and the full width (full width of the van) both are approx 6ft in length when in the bed position.

They are at the correct height when in the seat position 15" (38cm) plus foam from the floor and raise to 19" (50cm) plus foam when in the bed

position offering comfort in both positions. We do not offer upholstered cushions, but can supply the foam from £60.00.

The beds are manufactured from square 3/4" tube with properly formed corners and laser cut brackets to ISO-9001.

The T4 and T5 beds have an additional rear platform of 2" x 1" box section, making for an extremley strong structure.

Powder coated in sexy italian silver and incorperating the EZBAK™ mechanism for easier bed to seat return in one easy operation

No springs to ping and flimsy pins to pop just good old solid engineering puts Bluebird beds ahead of the rest.

We understand that everyones tastes are different that's why we don't supply the foam readyily upholstered

Check your local Yellow pages for Car Timmers and Upholsterers or any of the VW magazines.

One tip though, the use of vinyl for a bed is not a good idea due to it's lack of breathablity(Betty Swalocks)

All our beds are fully MOT compliant.

Manufacturing rock and roll beds since 1992 Featured in    as a "HOW TO" in 1999

For seat belts we recommend

Rock'n'Roll beds,superior, heavy duty, 3/4"hollow box steel frame, Now powder coated in silver, with grey melamine boards, complete kit.

and incorperating the new E-ZBAK ™   mechanism for easier bed to seat return in one easy operation

No springs to ping and flimsy pins to pop just good old solid engineering puts Bluebird beds ahead of the rest.

The width of the 3/4 bed ,at the widest part is 45"

Both beds measure approx 6 ft when in the bed position from the rear cargo door forward

These fit splits ,bays and T25's.and are fully MOT compliant.

Featured  Volks World Magazine Sept '99

We can supply as frames only, with fit kit minus boards:-

3/4 width minus boards..........................................    £ 250.00

3/4 width with boards...........................................    £ 275.00

Full width minus boards..........................................    £ 275.00

Full width with boards..............................................    £ 325.00

Complete with full fitting instructions and all fastenings.

The seat part hinges up for storage.

Made in the UK

Please note delivery time for our beds is 10-14 days

Order early to avoid disapointment .

When only the best will do

Product: Rock n roll bed split bay
Product Code: sbed
Quantity:
type:

 Rock and roll foam sets to fit our beds made from 3" mediun density flame retardant foam

     3/4 split -bay      £ 75.00

Full width split-bay    £ 85.00

Sets include seat base -back base-rear base

Made in the UK

Product: Foam sets baysplit
Product Code: foam1
Quantity:
Type:

New Addition for our Rock and Roll Beds

EZbak™ Handle

Retro fit to all our older model beds (white frames) easy to fit just drill one hole and bolt up

Transforms the way you put the bed back into the seat position

EZBAK™ mechanism for easier bed to seat return in one easy operation

No springs to ping and flimsy pins to pop just good old solid engineering puts Bluebird beds ahead of the rest.

Click here for instruction sheet

All new Silver beds have this feature

Laser cut 5 mm pasifated steel with fixing

£ 17.50 includes P&P and VAT

Product: EZBak lever
Product Code: EZBAK
Quantity:

 

Middle Seat for walk through Bay window vans.  Once offered by VW as an accessory now produced by us

in kit form, fits to the bulkheads and cab seat plinths with no modifications,can legally be used with lap belts.

All the bolt holes are there so no drilling and no welding.

Comes as a full kit comprising of the seat frame, shaped boards and  foam and fixing kit

£ 90.00

Made in the UK

Product: Middle seat
Product Code: mdlst
Quantity:

Middle seat frame only with fixings and board/foam templates

£70.00

Made in the UK

Product: middle seat frame only
Product Code: mstfrm
Quantity:

T2 Bay   Seat swivel plate made in the E U by FASP,  top quality

This seat swivel is designed to fit the Volkswagen Bay window T2

It is fully crash test approved to all European standards.

These will fit bays with the bulkheads removed, the original

runners need to be taken off the seat box and rewelded onto the swivel plates

£95.00 each

Product: T2 Bay swivel base
Product Code: bayswl
Quantity:
model:

 

NEW

Bay seat swivel with runners

T2 Bay   Seat swivel plate made in the E U by FASP,  top quality

This seat swivel is designed to fit the Volkswagen Bay window T2

It is fully crash test approved to all European standards.

These will fit bays with the bulkheads removed

comes with seat runners attached

no cutting or welding involved, simple nut and bolt job

£ 165.00 each

Product: Bay seat swivel with runners
Product Code: swivl r
Quantity:

 

buddy seats

RHD shown

Hinged buddy seats, fit behind passenger seat.

Now in sexy silver powder coat

The main seat is fixed to the bulkhead and hinges up for storage the side (buddy) seat clips in when needed.

 Fits all bays and splits, can be adapted for use in T25's and bays without bulkheads.

These are available for RHD and LHD vans and also in singular form.

Price  £ 70.00 Pair (frames only)

Price  £ 50.00  Single seat.  Made in the UK

Product: Buddy Seats
Product Code: bdy sts
Quantity:
type:

Clip in side seat, this is the loose part of the pair as above ,which can be clipped into the

side of a seat box as and when needed, comes as a frame only with stainless eyebolt fixings

£ 35.00  each

Product: Clip in side seat
Product Code: sdeset
Quantity:
 

 

Not just for kids, and great for storage.

Front cab bunk bed

Brackets fit to A & B posts with the screws provided the poles then  fit into these when in use.

Heavy duty fabric provides the base. Feature telescopic poles for easy storage

Simple and safe design .Easy to fit.

Fits all splits ,bays & T25's.

Poles pack down to 105cm

Price  £59.95   Made in the UK

 Send us your pics

Our prices include VAT and Carriage

Product: Cab Bunk
Product Code: cbnk
Quantity:

OUT OF STOCK

Repro under dash parcel tray,mesh type,in black as originally fitted as an accessory, sold as a pair, fits all bays

Price  £ 49.95    Made in the UK

Don't forget our prices include VAT & carriage in the UK

Product: Parcel Tray pair
Product Code: ptry
Quantity:

 Heavy duty self switching Split charge Relay

A combined fridge power and charging relaythat automaticlly senses your vehicle battery level.

Only switching when sufficient output is availablefrom the alternator, eliminating the chance of

flattening/damaging your vehicle battery, even if the ignition is left switched on.

£ 19.95

Product: Heavy duty Split charge relay
Product Code: splch
Quantity:

Table base for use with chrome table legs

£ 15.00

Floor base

£ 15.00

Product: Table base
Product Code: tabas
Quantity:
type:

Recessed table floor base cover

£ 3.50

Product: floor base cover
Product Code: bcov
Quantity:

Chrome table leg 70cm length

£ 15.00

Chrome table leg 60cm length

£ 12.50

Product: Chrome table Leg
Product Code: lg
Quantity:
:

Superior quality spring steel plastic coated table leg clips

£ 3.50 each

Product: Table leg clip
Product Code: clps
Quantity:

Mid Grey MDF table top with grey plastic edging 18"x 30"

£ 35.00

Product: Table top
Product Code: tbl
Quantity:

 

 

full table.jpg

Table Kit comprising of :-

1 x Mid Grey MDF table top with grey plastic edging 18"x 30"

1 x Table base

1 x 70cm Chrome leg

1 x Floor base

2 x Leg clips

1 x Floor base cover

£59.95 inclusive of VAT and Carriage (UK Mainlnad)

Product: Table kit
Product Code: tblkit
Quantity:

Aluminium Table leg tripod for use outdoors with above legs

£ 40.00

Product: Table tripod
Product Code: Tri
Quantity:

Repro kool air (ambulance) fans.for bay windows.

Once offered as an original accessory in hot climates,but now hard to find.

This repro kit fits as original, in the fresh air ducts under the dash and delivers a whopping 230CFM (each) of cool air,

through the side eyeball and dash vents.

Great when abroad or even on the odd hot UK summers day.

Just open up the front grill,switch on the fans and feel the cooling air.....

Come complete as a pair with all wiring, connectors,fuse, twin speed switch and instructions.

Price  £ 69.95

Product: Kool air fans bay
Product Code: klfns
Quantity:

Don't forget all prices include VAT and cariage in mainland UK.

Repro ambulance fans to fit splits

can be bonded ar tack welded into position, come with pre wired switch fuse etc

Price  £ 69.95 (cover plate not included)

Product: Split ambulance repro
Product Code: splt fns
Quantity:

Passenger foot rest (dashboard saver) adds extra comfort on long journeys

for the short of leg, height approx 6"

Price £ 15.00  Made in the UK

Product: Passenger foot rest
Product Code: ftrst
Quantity:

Devon   Drawer handle. The original brown one.

Price £ 2.95

Product: devon drawer handle
Product Code: drhdl
Quantity: