01254 888416  

T5 Interior parts page

All Prices include VAT and Carriage

Our range of beds fit all models of VW vans from the Splits to the T5.

All our beds bolt in using High Tensile nuts and bolts and fitting is simplicity itself.  

We sell worldwide and many converters use our beds, we have the reputation. With prices starting from £250.00 including carriage

(UK Mainland) and VAT our beds are excellent value for your money.

Two sizes  of bed are available for each model of van 3/4 width maximum width of the bed 45" which leaves room for side units, 

and the full width (full width of the van) both are approx 6ft in length when in the bed position.

They are at the correct height when in the seat position 15" (38cm) plus foam from the floor and raise to 19" (50cm) plus foam when in the bed

position offering comfort in both positions. We do not offer upholstered cushions, but can supply the foam from £60.00.

The beds are manufactured from square 3/4" tube with properly formed corners and laser cut brackets to ISO-9001.

The T4 and T5 beds have an additional rear platform of 2" x 1" box section, making for an extremley strong structure.

Powder coated in sexy italian silver and incorperating the EZBAK™ mechanism for easier bed to seat return in one easy operation

No springs to ping and flimsy pins to pop just good old solid engineering puts Bluebird beds ahead of the rest.

We understand that everyones tastes are different that's why we don't supply the foam readyily upholstered

Check your local Yellow pages for Car Timmers and Upholsterers or any of the VW magazines.

One tip though, the use of vinyl for a bed is not a good idea due to it's lack of breathablity(Betty Swalocks)

All our beds are fully MOT compliant.

Manufacturing rock and roll beds since 1992 Featured in    as a "HOW TO" in 1999

For seat belts we recommend

 T5 Rock & Roll beds

Same spec as above, complete with powder coated rear support framework,all brackets,floor spreader plates,  fixing hardware and instructions

Locks into postion when in the seat mode, will not shake loose. Bolts through the floor with 18 High tensile nuts and bolts with 4   2" x 4" under floor spreader plates.

These are fully MOT compliant.These beds are exported to Germany to individual customers, where, after fitting must go for an local TUV test.

and although we don't have any documentation for TUV compliance we do have alot of beds out there that do.

Incoperating the EZBAK™ mechanism for easier bed to seat return in one easy operation

No springs to ping and flimsy pins to pop just good old solid engineering puts Bluebird beds ahead of the rest.

Now in sexy silver powder coat and grey boards and incorperating the NEW  E-ZBAK ™  sytem

3/4 width without boards..........................     £ 350.00

3/4 width with boards................................     £ 400.00

Full width without boards...........................      £ 375.00

Full width with boards................................    £ 425.00

Storage is accessed from the rear doors and under the seat.

  Made in the UK

Please note delivery time for our beds is 10-14 days

Order early to avoid disapointment .

Product: T4 rock n roll bed
Product Code: t4rr
Quantity:
type:

 Rock and roll foam sets to fit our beds made from 3" mediun density flame retardant foam

3/4 T5                £ 75.00

Full width T5      £85.00

Sets include seat base -back base-rear base

Made in the UK

Product: T5 Foam set
Product Code: t5f
Quantity:
type:

New Addition for our Rock and Roll Beds

EZbak™ Handle

Retro fit to all our older model beds (white frames) easy to fit just drill one hole and bolt up

Transforms the way you put the bed back into the seat position

EZBAK™ mechanism for easier bed to seat return in one easy operation

No springs to ping and flimsy pins to pop just good old solid engineering puts Bluebird beds ahead of the rest.

Click here for instruction sheet

All new Silver beds have this feature

Laser cut 5 mm pasifated steel with fixing

£ 17.50 includes P&P and VAT

Product: EZBak lever
Product Code: EZBAK
Quantity:

T5 seat swivel

Seat swivel plate made in the E U by FASP,  top quality

This seat swivel is designed to fit the Volkswagen  T5 standard seat box,l

It is fully crash test approved to all European standards.

Drivers side comes with handbrake adaptor bracket

£ 135.00 Each inc VAT and Carriage

Product: T5 Seat swivel
Product Code: T5swvl
Quantity:
:

 Heavy duty self switching Split charge Relay

A combined fridge power and charging relaythat automaticlly senses your vehicle battery level.

Only switching when sufficient output is availablefrom the alternator, eliminating the chance of

flattening/damaging your vehicle battery, even if the ignition is left switched on.

£ 19.95

Product: Heavy duty Split charge relay
Product Code: splch
Quantity:

Table base for use with chrome table legs

£ 15.00

Table floor base

£ 15.00

Product: Table base
Product Code: tabas
Quantity:
type:

Recessed table floor base cover

£ 3.50

Product: floor base cover
Product Code: bcov
Quantity:

Chrome table leg 70cm length

£ 15.00

Chrome table leg 60cm length

£ 12.50

Product: Chrome table Leg
Product Code: lg
Quantity:
:

Mid Grey MDF table top with grey plastic edging 18"x 30"

£ 35.00

Product: Table top
Product Code: tbl
Quantity:

 

full table.jpg

Table Kit comprising of :-

1 x Mid Grey MDF table top with grey plastic edging 18"x 30"

1 x Table base

1 x 70cm Chrome leg

1 x Floor base

2 x Leg clips

1 x Floor base cover

£59.95 inclusive of VAT and Carriage (UK Mainlnad)

Product: Table kit
Product Code: tblkit
Quantity:

Aluminium Table leg tripod for use outdoors with above legs

£ 40.00

Product: Table tripod
Product Code: Tri
Quantity:

Superior quality spring steel plastic coated table leg clips

£ 3.50 each

Product: Table leg clip
Product Code: clps
Quantity: